The two capacitors are used to start the compressor motor and to run the compressor motor. If your air compressor has two capacitors, it is most likely a dual-voltage capacitor. This means that it is specifically designed to work with both 110-volt and 220-volt AC circuits. The reason your compressor has two capacitors is because…
The compressor is not building enough pressure. If your air compressor drops to 30 psi, there are a few potential causes. First, check the pressure gauge to see if it is accurate. If it is, then the most likely cause is a leak in the system. Check all of the connections and fittings for leaks….
when the air is compressed, it becomes hot and the moisture in the air condenses. This condensation collects in the tank and can eventually become liquid. Here’s a look at why this happens and what you can do about it. When an air compressor is used, it takes in air and compresses it, which in…
The air compressor regulator may be leaking air because the O-ring or gasket is damaged or missing. An air compressor regulator is used to control the air pressure in an air compressor. If the regulator is not working properly, it can cause the air compressor to leak air. There are a few reasons why an…
The motor is tripping because it is overheating. If your air compressor motor trips, it could be for a number of reasons. Here are a few possibilities: 1. The air compressor is overloaded. This could be due to too much air being demanded, or a too-high pressure setting. 2. The air compressor is overheating. This…
It takes a long time to air up because the compressor has to fill the tank with air. If your air compressor is taking a long time to air up, there are a few potential reasons why. First, check that the compressor is properly lubricated. If it isn’t, the piston could be seizing, which would…
It is most likely because the air compressor is not getting enough power. If your Craftsman air compressor isn’t spinning, there are a few things that could be causing the problem. The most common cause is that the air compressor is not properly lubricated. You can check the oil level and add oil if necessary….
The compressor may be low on oil, or the air filter may be dirty. An air compressor is a device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air). By one of several methods, an air compressor forces more and more air…
The Kobalt compressor bleeds air because it is faulty. If your Kobalt air compressor is bleeding air, there are a few possible reasons why. First, check to see if the air compressor is properly oiled. If the compressor is low on oil, it will likely bleed air. Second, check to see if the air compressor’s…
The most likely reason is that the air compressor is not properly maintained and has therefore lost some of its original power. If you have an air compressor that is not providing enough air, there are a few things that could be causing the issue. The most common reason for an air compressor to not…