If the air compressor is not outputting enough compressed air, there are several things that could be causing the problem. The first thing to check is whether the intake filter is dirty and needs to be replaced. If the filter is clean, then check the air compressor oil level and make sure it is filled…
An air compressor blows out water because it is condensing the moisture in the air. This is normal and nothing to worry about. The amount of water that is blown out will vary depending on the humidity levels in the air. If you live in a very humid climate, you may notice that your air…
There are two ways to reset a Campbell Hausfeld air compressor. The first way is to unplug the unit and then plug it back in. Unplug the Campbell Hausfeld air compressor from its power source Remove any tools or other objects that are connected to the air compressor Locate the pressure release valve on the…
There is no reset button on a Kobalt air compressor. If the unit stops working, it must be unplugged and then plugged back in to reset it. If you’re looking for the reset button on your Kobalt air compressor, it’s located on the back of the unit. To reset the compressor, simply press and hold…
If your Fatmax air compressor won’t shut off, it may be because the pressure switch is not working properly. Another possibility is that there is something blocking the intake valve or the exhaust valve. You should check these things first before troubleshooting any further. Are you having issues with your Fatmax air compressor not shutting…
If your air compressor is getting hot, it could be because the temperature inside the unit is rising. This can happen for a number of reasons, such as if the unit is overworked or if there’s something blocking the airflow. If your air compressor is getting hot, you should try to identify the cause so…
The most common reason an air compressor will make water is due to condensation. This can happen when the air around the compressor is cooler than the compressed air inside the tank. As the warm air inside the tank cools, it causes water vapor to condense and collect on the walls of the tank. If…
If your air compressor keeps shutting off, it could be due to a variety of reasons. One possibility is that the air compressor is overheating. If this is the case, you should check to see if the unit has adequate ventilation and if the cooling fins are clean. Another possibility is that there is an…
To remove the pulley from an air compressor motor, first disconnect the power to the motor. Then, using a wrench or socket, loosen the bolt that holds the pulley in place. The pulley can then be removed by sliding it off of the shaft. Unplug the air compressor motor from the power source Remove any…
If you want to blow up a float with an air compressor, you’ll need to attach the air compressor to the float using a inflation needle. Then, turn on the air compressor and hold down the trigger until the float is fully inflated. Make sure that the air compressor is turned off and disconnected from…